Anybody need anything?

[Audiyoda]

Okay...a bit of a long shot, but I'm looking for a reclaim tank WITH a active thermostat. Need something that will stay at a constant (say 140 degrees) temp without being monitored.

[edwardn]

Do you have any slit lamps for sale?

[Johns]

Do you have any slit lamps for sale?

Noting fancy, just a bunch of AOs...

[cclcal]

Noting fancy, just a bunch of AOs...

I need something fancy...a Alain Mikli frame AL-1008. anyone out there to help me out? thanks

also a Humphrey FDT or Matrix perimeter would be nice too

[Tokienulv]

Looking for a Radiuscope. LMK if you got one.

[HarryChiling]

bump

[kcount]

Hello John, You wouldn't have some confirmation flippers around would you?

[Johns]

Hello John, You wouldn't have some confirmation flippers around would you?

I think I might...I'll check.

[nusz.kevin]

I need a square stand alone glass display case approx. 2' x 2' x 5' (doesn't have to be exactly this) and doesn't matter what base or top looks like. I just want the glass to make into a custom display case. Do you have anything? Do you have any photos of it? THANKS!

[gimbelf]

Hi John,

I'm after some blockers and groovers if you have a few laying around. Please let me know.

Frank

[DragonLensmanWV]

Okay...a bit of a long shot, but I'm looking for a reclaim tank WITH a active thermostat. Need something that will stay at a constant (say 140 degrees) temp without being monitored.

Rot's a ruck!
I had to finally get a new one from DAC - $2800!!!
But I'll make you a deal on my old one. Needs a heating element and spout.

[kat]

Looking for a GOOD used lensometer. Old style prefered as to the new auto styles. Can't afford to spend much.
Thanks

[danielh]

Hey,

I'm new to this forum, and I'm opening an office in 6 months.....need everything. I've read a few posts mentioning display rods and clips....does anyone have any available. Also looking for a decently priced: fundus camera, auto ref/K, manual lensometer, corneal topo, phoropter (minus cyl), good slit lamp......and I'm sure I'm leaving some stuff out.

Thanks for any help!

Daniel

[CDShanksOD]

Looking for a transfer bar for an old Mentor slit lamp (rod the slit lamp slides back and forth on). Have checked everywhere, got a slit lamp that was disassembled, stored, the bar got lost meantime, cannot find one. This even has a Haag Streit tonometer mounted on it.

[kat]

Hi Johns,
I am looking for a good lensometer, do you have any???
Thanks,
Kat

[Johns]

Hi Johns,
I am looking for a good lensometer, do you have any???
Thanks,
Kat

Sold the last one in june.

[DrBaker]

I need a new controller for the Topcon CV-3000. The model number is KB-1DS. If you know of anything please e-mail me at albaker@ucdavis.edu

Thanks!

[Johns]

I just got 2 tint units in. One is an 8 pot Phantom, the other is a smaller 6 pot (I think) micro. $75 ea. plus shipping. They come w/all the pots.

[vallieo]

I need a good used salt pan??

[Johns]

I need a good used salt pan??

Ours went down last month.

$10 for a crock pot (w/clear glass lid) at Dollar General.

-It's deeper
-It holds more salt w/out spilling out.
-The temperature gauge is more accurate
-I can get you one for $15.:bbg:

[vallieo]

thanks, I'm gonna try it!

[ncopt1]

Hey John, I need a third arm for my woodland Instrument stand, model F 1993, a tangent screen with accessories and possibly some frame rods and clips. let me know what you have. ncopt@ymail.com

[mrroja]

Hi...I am looking for an ait blocker...dont want to spend much... i current have a nidec ce-1 and want something better...

thanks, josh
mrroja@yahoo.com

[kcount]

I just got 2 tint units in. One is an 8 pot Phantom, the other is a smaller 6 pot (I think) micro. $75 ea. plus shipping. They come w/all the pots.

What are the dimensions on that 6 pot micro?

[Johns]

What are the dimensions on that 6 pot micro?

I'm not sure. I saw it yesterday when I was moving some stuff around, but don't have an idea as the the size. I'll check it out next time I'm in the warehouse.