Originally Posted by
optiserv
Hope your problem is solved by now. If not here are a few thinks you can try.
The error refers to the Z axis of the edger (left right movement of the wheels)
1. Check that that movement is not blocked by any debris, swarf, and doesn't have any rough spots, and also that the wheels are traveling all the way.
2. on the right back side you'll find the Z transfer assy. Check the rack and the pinion on that assy. Clean the rack and pinion.
3. check the balance of the edger. A worn clutch on the z unit will be influenced by the balance of the edger, indicating the need to adjust or sometime replace the z unit.
Bookmarks