USED HORIZON II DRY-CUT LENS EDGER FOR SALE FOR $50.00 NO RESERVE!

YOU CAN EARN THAT BACK ON ONE SALE! GREAT RETURN OF INVESTMENT!
LISTED ON EBAY ITEM #
300297598292


ITEM IS USED FOR EDGING OPHTHALMIC LENS FOR EYEWEAR.

GREAT FOR STARTER OPTICAL STORE ON A BUDGET. IT INCLUDES THE PRESSURE PUMP AND VACUUM AND MANUAL! MACHINE DOES NOT REQUIRE WATER TO CUT SO YOU VERY LITTLE MAINTENANCE IS REQUIRED. I WILL ALSO INCLUDE ADDITIONAL BLADES, DIFFERENT BASE CURVE MOUNTING BLOCKS FOR THE MACHINE.
ITEM WAS WORKING BEFORE IT WAS TAKEN FROM AN OPTOMETRY OFFICE ABOUT 4 YEARS AGO. IT WAS STORED INDOORS SINCE THEN AND HAS NOT BEEN TESTED SINCE. THEREFORE, ITEM IS SOLD AS-IS.

LOCAL PICK-UP ONLY! WE ARE IN LOS ANGLES, CALIFORNIA.

WE ACCEPT CASH, CASHIER'S CHECK, MONEY ORDERS, PAYPAL.
HERE IS SOME MORE INFO FROM THE COMPANY ABOUT THE PRODUCT:

The Horizon II is a time tested, dry-cutting pattern edger that can edge CR-39, Polycarbonate and Hi-Index lenses.
Speed,Accuracy and Convenience of Dry-Cutting Technology:

Cuts all shapes, sizes and powers of CR-39, Polycarbonate and Hi-Index lenses without changing
cutters. Carbide blades cut instead of grind, so there is no rounding of the bevel. Standard cycle time
is less than one minute.

Vacuum System:
Plastic debris is removed by a vacuum system, eliminating the need for coolants.

Optional Cutters:
As factory equipped, the edger will cut bevel and rimless interchangeably. Optional cutters expand
edge peripheries to a dozen finishes, including Grooving, Faceting, Shelving and Roll & Bevel.

Variable Flow Control:
Standard cycle time is less than one minute, with a 20 second finish-only cycle for touch-up. Even the largest Poly lenses can be edged in a single cycle with a slower flow control cycle

All Electronic:
Fully integrated circuitry eliminates microswitch adjustment, ensuring high reliability.

Proven Performance:
Thousands of installations worldwide have proven the Horizon II to be a workhorse of the industry.

Two Bevel Placement System:
Two fully-adjustable bevel guide systems are standard: A Teflon Guide Wheel which tracks the actual front curve of the lens or a Cam Tracking System which duplicates nominal base curves. Both
systems provide for fully variable front-to-back placement on all periphery finishes. Each system
features a cycle-pause feature which allows the operator to easily make bevel placement adjustment
mid-cycle.

Pattern Making:
Pattern from a lens capability, a feature unique to dry edging, is standard.

Brushless Motor:
Our DC, brushless motor is ultra quiet and more durable than conventional router motors.




Additional Features
  • Air chucking.
  • Multiple edge finishes with optional cutters.
  • Modular design facilitates in-lab maintenance and repair.
Mechanical Weight:
Edger -112 lbs
Vacuum -24 lbs
80 PSI clean, dry compressed air required
Electrical Input:
115 VAC 60 Hz,1500 WATTS
230 VAC 50 Hz,1500 WATTS
15 Amp. service line required

Variable Flow Control:
Standard cycle time is less than one minute, with a 20 second finish-only cycle for touch-up. Even the largest Poly lenses can be edged in a single cycle with a slower flow control cycle.

Ranges Front Base Curve Range: 0 -12D
Lens Blank: Up to 100mm
Minimum Finished “B ” Size::24mm (with 1/2-eye clamp:19mm)



"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."