Results 1 to 7 of 7

Thread: National optronics ophthalmic lens horizon ii edger for sale ( $50.00! )

  1. #1
    Rising Star OptiBoard Bronze Supporter
    Join Date
    Jun 2004
    Location
    los angeles
    Occupation
    Optometrist
    Posts
    78

    Redhot Jumper National optronics ophthalmic lens horizon ii edger for sale ( $50.00! )

    USED HORIZON II DRY-CUT LENS EDGER FOR SALE FOR $50.00 NO RESERVE!

    YOU CAN EARN THAT BACK ON ONE SALE! GREAT RETURN OF INVESTMENT!
    LISTED ON EBAY ITEM #
    300297598292


    ITEM IS USED FOR EDGING OPHTHALMIC LENS FOR EYEWEAR.

    GREAT FOR STARTER OPTICAL STORE ON A BUDGET. IT INCLUDES THE PRESSURE PUMP AND VACUUM AND MANUAL! MACHINE DOES NOT REQUIRE WATER TO CUT SO YOU VERY LITTLE MAINTENANCE IS REQUIRED. I WILL ALSO INCLUDE ADDITIONAL BLADES, DIFFERENT BASE CURVE MOUNTING BLOCKS FOR THE MACHINE.
    ITEM WAS WORKING BEFORE IT WAS TAKEN FROM AN OPTOMETRY OFFICE ABOUT 4 YEARS AGO. IT WAS STORED INDOORS SINCE THEN AND HAS NOT BEEN TESTED SINCE. THEREFORE, ITEM IS SOLD AS-IS.

    LOCAL PICK-UP ONLY! WE ARE IN LOS ANGLES, CALIFORNIA.

    WE ACCEPT CASH, CASHIER'S CHECK, MONEY ORDERS, PAYPAL.
    HERE IS SOME MORE INFO FROM THE COMPANY ABOUT THE PRODUCT:

    The Horizon II is a time tested, dry-cutting pattern edger that can edge CR-39, Polycarbonate and Hi-Index lenses.
    Speed,Accuracy and Convenience of Dry-Cutting Technology:

    Cuts all shapes, sizes and powers of CR-39, Polycarbonate and Hi-Index lenses without changing
    cutters. Carbide blades cut instead of grind, so there is no rounding of the bevel. Standard cycle time
    is less than one minute.

    Vacuum System:
    Plastic debris is removed by a vacuum system, eliminating the need for coolants.

    Optional Cutters:
    As factory equipped, the edger will cut bevel and rimless interchangeably. Optional cutters expand
    edge peripheries to a dozen finishes, including Grooving, Faceting, Shelving and Roll & Bevel.

    Variable Flow Control:
    Standard cycle time is less than one minute, with a 20 second finish-only cycle for touch-up. Even the largest Poly lenses can be edged in a single cycle with a slower flow control cycle

    All Electronic:
    Fully integrated circuitry eliminates microswitch adjustment, ensuring high reliability.

    Proven Performance:
    Thousands of installations worldwide have proven the Horizon II to be a workhorse of the industry.

    Two Bevel Placement System:
    Two fully-adjustable bevel guide systems are standard: A Teflon Guide Wheel which tracks the actual front curve of the lens or a Cam Tracking System which duplicates nominal base curves. Both
    systems provide for fully variable front-to-back placement on all periphery finishes. Each system
    features a cycle-pause feature which allows the operator to easily make bevel placement adjustment
    mid-cycle.

    Pattern Making:
    Pattern from a lens capability, a feature unique to dry edging, is standard.

    Brushless Motor:
    Our DC, brushless motor is ultra quiet and more durable than conventional router motors.




    Additional Features
    • Air chucking.
    • Multiple edge finishes with optional cutters.
    • Modular design facilitates in-lab maintenance and repair.
    Mechanical Weight:

    Edger -112 lbs
    Vacuum -24 lbs
    80 PSI clean, dry compressed air required
    Electrical Input:
    115 VAC 60 Hz,1500 WATTS
    230 VAC 50 Hz,1500 WATTS
    15 Amp. service line required

    Variable Flow Control:
    Standard cycle time is less than one minute, with a 20 second finish-only cycle for touch-up. Even the largest Poly lenses can be edged in a single cycle with a slower flow control cycle.

    Ranges Front Base Curve Range: 0 -12D
    Lens Blank: Up to 100mm
    Minimum Finished “B ” Size::24mm (with 1/2-eye clamp:19mm)



    "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."







  2. #2
    Banned
    Join Date
    Jun 2000
    Location
    Only City in the World built over a Volcano
    Occupation
    Dispensing Optician
    Posts
    12,996
    Just courious but what in the H would the FDA care about an edger? It's not putting out a consumeable product, just edgeing a lens.

    Chip

  3. #3
    Vision Equipment OptiBoard Corporate Sponsor Leo Hadley Jr's Avatar
    Join Date
    Mar 2003
    Location
    Florida
    Occupation
    Other Optical Manufacturer or Vendor
    Posts
    1,664
    Quote Originally Posted by chip anderson View Post
    Just courious but what in the H would the FDA care about an edger? It's not putting out a consumeable product, just edgeing a lens.

    Chip
    Thats a copy paste from ebay, you have to have that statement to comply with ebay rules
    Leo Hadley Jr
    Vision Equipment
    T: 855.776.2020

    www.visionequipmentinc.com

  4. #4
    Underemployed Genius Jacqui's Avatar
    Join Date
    Oct 2003
    Location
    Frostbite Falls, Mn.
    Occupation
    Optical Wholesale Lab (other positions)
    Posts
    7,417
    Even I could afford that :D

  5. #5
    Ophthalmic Optician
    Join Date
    Sep 2001
    Location
    USSA
    Occupation
    Dispensing Optician
    Posts
    12,591
    For $50, it's not ever worth taking the time to list it! The only payback is that you don't have to break your back taking it out of your office!
    :cheers::cheers:

    Best of Luck!:cheers::cheers::cheers::cheers:
    Ophthalmic Optician, Society to Advance Opticianry

  6. #6
    OptiBoard Apprentice
    Join Date
    Dec 2006
    Location
    akron,ohio
    Occupation
    Dispensing Optician
    Posts
    13

    Horizon edgerI

    Is the edger still available?

  7. #7
    Rising Star OptiBoard Bronze Supporter
    Join Date
    Jun 2004
    Location
    los angeles
    Occupation
    Optometrist
    Posts
    78

    horizon edger sold

    sorry, it has been sold

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 1
    Last Post: 01-16-2011, 06:38 PM
  2. National Optronics Horizon III for sale
    By Giorio in forum Optical Marketplace
    Replies: 4
    Last Post: 01-16-2011, 06:36 PM
  3. Optronics Horizon III - A good edger?
    By Dr. B in forum General Optics and Eyecare Discussion Forum
    Replies: 6
    Last Post: 07-27-2008, 10:11 AM
  4. Horizon II optronics pattern edger
    By Bobbi in forum Optical Marketplace
    Replies: 0
    Last Post: 07-12-2006, 11:20 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •