The hi-end PALs in my dream

[Bobie]

The hi-end PALs in my dream are below ;

• Customized wavefront technology
• Customized inset by order 0.1 mm step
• Customized corridor 0.1 mm step from 9 mm up to 20 mm
• Customized distance zone 0.1 mm step from + 5 mm up to - 5 mm from fitting point
• Customized soft or hard design 1% step from 100 level of design
• Customized distance , intemediate and reading zone 1 % step from 100 level of each zone
• Customized position of wear ( CVD / PTA / FFA ) , FFA up to 30 degree
• SPH. / CYL / ADD 0.01D step
• SPH. from + 20.00D up to - 20.00D
• CYL up to - 8.00D
• ADD from 0.25D up to 4.00D
• Material : Plastic 1.76 ABBE 40 High Tensile Strength for rimless frame with teflon coating + anti-fog and tintable from 1% up to 90%.
• Material : Plastic 1.76 Polarized ABBE 40 High Tensile Strength for rimless frame with teflon coating and tintable from 1% up to 90%.
• Material : Plastic 1.76 photochromic ABBE 40 High Tensile Strength for rimless frame with teflon coating with 20 difference color of photochromic and with 3 difference temperature option like very dark at 10 degree / 20 degree / 30 degree.
• Customized front base curve from 0.01 up to 16.00 at 0.01 step
• The retail price = 10,000 US$ per pair
• Fully 3 years guaranteed

In our world today, we have more than 1 million customers who can pay $10,000 per pair for Hi-End Progressive lenses and more than 10% of them would like to pay this price because they believe that " Life is too short to limit your vision " and they will come to any hi-end progressive specialist who really believes that!.

" Only believe "
:D

[mahmoud.hamza]

The hi-end PALs in my dream are at below ;

• Customized wavefront technology
• Customized inset by order 0.1 mm step
• Customized corridor 0.1 mm step from 9 mm up to 20 mm
• Customized distance zone 0.1 mm step from + 5 mm up to - 5 mm from fitting point
• Customized soft or hard design 1% step from 100 level of design
• Customized distance , intemediate and reading zone 1 % step from 100 level of each zone
• Customized position of wear ( CVD / PTA / FFA ) , FFA up to 30 degree
• SPH. / CYL / ADD 0.01D step
• SPH. from + 20.00D up to - 20.00D
• CYL up to - 8.00D
• ADD from 0.25D up to 4.00D
• Material : Plastic 1.76 ABBE 40 High Tensile Strength for rimless frame with teflon coating + anti-fog and tintable from 1% up to 90%.
• Material : Plastic 1.76 Polarized ABBE 40 High Tensile Strength for rimless frame with teflon coating and tintable from 1% up to 90%.
• Material : Plastic 1.76 photochromic ABBE 40 High Tensile Strength for rimless frame with teflon coating with 20 difference color of photochromic and with 3 difference temperature option like very dark at 10 degree / 20 degree / 30 degree.
• Customized front base curve from 0.01 up to 16.00 at 0.01 step
• The retail price = 10,000 US$ per pair
• Fully 3 years guaranteed

In our world tody , we have more than 1 million customer who can pay 10,000 US$ per pair for Hi-End Progressive lenses and more than 10% of them would like to pay this price , because they believe that " Life is too short to limit your vision " and they will come to any hi-end progressive specialist who really believe that!.

" Only believe "
:D

To believe that is so difficult!! :hammer:
But be sure that we will have some of this suggestions in few years but not all!!.
and the thing that will be very difficul to achive is the material because it is very very difficult to have a cery hight index with th abb value at first and the more difficult is to tint it to 90%:drop:...........
and for all the other data, the futur freeform machines can do it I am sure!!
But i hope that this day in which we can produce this lens arrive :)

[mahmoud.hamza]

The hi-end PALs in my dream are at below ;

• Customized wavefront technology
• Customized inset by order 0.1 mm step
• Customized corridor 0.1 mm step from 9 mm up to 20 mm
• Customized distance zone 0.1 mm step from + 5 mm up to - 5 mm from fitting point
• Customized soft or hard design 1% step from 100 level of design
• Customized distance , intemediate and reading zone 1 % step from 100 level of each zone
• Customized position of wear ( CVD / PTA / FFA ) , FFA up to 30 degree
• SPH. / CYL / ADD 0.01D step
• SPH. from + 20.00D up to - 20.00D
• CYL up to - 8.00D
• ADD from 0.25D up to 4.00D
• Material : Plastic 1.76 ABBE 40 High Tensile Strength for rimless frame with teflon coating + anti-fog and tintable from 1% up to 90%.
• Material : Plastic 1.76 Polarized ABBE 40 High Tensile Strength for rimless frame with teflon coating and tintable from 1% up to 90%.
• Material : Plastic 1.76 photochromic ABBE 40 High Tensile Strength for rimless frame with teflon coating with 20 difference color of photochromic and with 3 difference temperature option like very dark at 10 degree / 20 degree / 30 degree.
• Customized front base curve from 0.01 up to 16.00 at 0.01 step
• The retail price = 10,000 US$ per pair
• Fully 3 years guaranteed

In our world tody , we have more than 1 million customer who can pay 10,000 US$ per pair for Hi-End Progressive lenses and more than 10% of them would like to pay this price , because they believe that " Life is too short to limit your vision " and they will come to any hi-end progressive specialist who really believe that!.

" Only believe "
:D

To believe that is so difficult!! :hammer:
But be sure that we will have some of this suggestions in few years but not all!!.
and the thing that will be very difficult to achive is the material because it is very very difficult to have a cery hight index with this abb value at first and the more difficult is to tint it to 90%:drop:...........
and for all the other data, the futur freeform machines can do it I am sure!!
But i hope that this day in which we can produce this lens arrive :)

[Jacqui]

Bobie:

Two things about this post.

1. I've been thinking along the same lines, except for the material. As Mahmoud said, with modern equipment it should be possible.

2. You really need a better hobby than designing lenses all the time. Have you considered collecting rocks, stamps, or gardening??

Jacqui

[Bobie]

:cheers: Jacqui :
My hobby is to collect full sets of hi-end trial PALs the world can get to try by myself and study each hi-end PALs with my student in Advance Progressive Addition Lenses Club. Would you like to join our club ? :cheers:

[mahmoud.hamza]

Bobie
Itis very nice to look for the best disign but my opinion is that every whearer Of PAL have a spesific disign that he can accept and depinding on his activities and his jod.
Ps: It good to have a club,
nice day :)

[paul9718]

Bobei:
I quite agree with your "dreaming" except the materials, which seems not important for all patients because even 1.50 may be good enough in case.

[Craig]

:cheers: Jacqui :
My hobby is to collect full set of hi-end trial PALs the world can get to try by myself and study each hi-end PALs with my student in Advance Progressive Addition Lenses Club. Would you like to join our club ? :cheers:

We do as many free form lenses as possible; availability is the only limiting factor. We do over 85% at this time and it is getting closer to 100% every day.
Craig :)

[Barry Santini]

Bobie:

I wouldn't even know how to best juggle all the tools/parameters your dream lens would have.

So I *would* like be become a student in your *club*!!

:D

Barry

[mike.elmes]

Bobie, it's not what we can do for the 1/2 of one percent of our PAL clients, it's what we can do for the other 99.5 percent.
What is your inexpensive go-to progressive for the bulk of your clients? We are using the Nikon i presio for the masses and the W and Seemax for the high rollers.

[Bobie]

• Nikon Presio i is one of the best semi-finished PALs.
• Nikon Presio W is better than Physio 360 & Ipseo in overall performance and it's much better in a small frame at fitting height 16 mm
• Nikon SeeMax and Rodenstock Multigressive MyView is very close overall performance.
• Nikon SeeMax + feature of Impression FreeSign + feature of Zeiss i.Scription = The worlds best hi-end PALs for 2008 and i can sell at 5,000 US$ per pair for retail price tag.

:bbg: :D

[mike.elmes]

I guess the Canadian consumer gets a deal:D We charge only 700.00 CAD for Seemax 1.6 Index Ice.

[Bobie]

The retail price of SeeMax PALs index 1.6 in Thailand is twice as expensive than in Canada, it may be because the mark up price of distributors in Thailand is not the same in Canada. ( Don't forget that , the total taxes in Thailand is only 30% of Canada and the salary for Doctor of optometry , dispensing optician and all staff is only 20% of Canadian rate ). I don't sell Nikon lenses because I don't like the policy of the distributors in Thailand.

[sumit082]

:cheers: Jacqui :
My hobby is to collect full sets of hi-end trial PALs the world can get to try by myself and study each hi-end PALs with my student in Advance Progressive Addition Lenses Club. Would you like to join our club ? :cheers:

Sure i would like to join your club.

[mahmoud.hamza]

The retail price of SeeMax PALs index 1.6 in Thailand is twice as expensive than in Canada, it may be because the mark up price of distributors in Thailand is not the same in Canada. ( Don't forget that , the total taxes in Thailand is only 30% of Canada and the salary for Doctor of optometry , dispensing optician and all staff is only 20% of Canadas rate ). I don't sell Nikon lenses because I don't like the policy of the distributors in Thailand.

What about the Freedom lenses from THAI OPTICAL GROUP ?
did you ever try it ?

[AdmiralKnight]

Does anyone else find it amusing that the word "Simple" Is etched next to the PD dial in that picture? :D

[Johns]

Does anyone else find it amusing that the word "Simple" Is etched next to the PD dial in that picture? :D

I find the whole thing amusing, and fascinating.:cheers: