Best Deal You Will Find

[hipoptical]

I have some family issues to take care of and am forced to sell some of my equipment. Take advantage of my desperation, please...

Surfacing: Dry-cut 108 generator with (3) extra wet-cut wheels, upgraded.
Computer (has calc. program in it), AIT marker, 3M Tape Applicator, Dual-center blocker (with plenty of alloy in it, and 2 good blocking rings), set of prism rings, (2) 5056 cylinder machines (fully pneumatic with stainless steel bowls)
Finishing: Nikon lensometer, Santinelli 7070 edger (great shape with new roughing wheel), finish blocker, twin hand stone, groover, 9-pot tint unit, frame warmer, buffer for edge polishing

Need to sell FAST...
Surfacing: $6,000
Finishing: $6,500
Take it all: $11,000 and I will throw in some extras...

[Fezz]

Holy Mackerel! Great price! Sorry about your situation. I am sure someone will jump on this Fast!

[joptician]

I wish I was in a position to buy your machines. I have been looking at a surface lab set like yours and the pricing is over $10K. I just don't have the money now. I know a few guys that have bought the same edger for $11K and $16K but they didn't get the lensometer or other items.

If these are around in a few months I will be ready to buy then but I'm sure they will go too fast for me. Sorry to hear about your troubles.

[eyesonyou]

email me please axiseye@gmail.com

I have some family issues to take care of and am forced to sell some of my equipment. Take advantage of my desperation, please...

Surfacing: Dry-cut 108 generator with (3) extra wet-cut wheels, upgraded.
Computer (has calc. program in it), AIT marker, 3M Tape Applicator, Dual-center blocker (with plenty of alloy in it, and 2 good blocking rings), set of prism rings, (2) 5056 cylinder machines (fully pneumatic with stainless steel bowls)
Finishing: Nikon lensometer, Santinelli 7070 edger (great shape with new roughing wheel), finish blocker, twin hand stone, groover, 9-pot tint unit, frame warmer, buffer for edge polishing

Need to sell FAST...
Surfacing: $6,000
Finishing: $6,500
Take it all: $11,000 and I will throw in some extras...

[hipoptical]

Sent email today...
I am happy to answer any questions anyone may have, give more information, whatever is needed.

[hipoptical]

PMs sent...

[eaglevision]

Would you be willing to email me some pictures of your equipment and also your phone number and email. I'm very interested in your equipment.

Thanks,
Eagle Vision

eaglevisioncenter@yahoo.com

[hipoptical]

I'll get you the pictures and information today...

[hipoptical]

I've tried to respond to all the PMs, but if I've missed you, please send your request again. I need a quick resolution, so don't be afraid to make an offer- maybe we can work something out.
Don't think I mentioned this, but if you're in the Dallas area (or want to be)- I'll let you have my entire office with the equipment, fixtures and all for an incredibly good deal.

Just needing help..

[eaglevision]

I am very interested in this equipment. Could you please email me your phone number and I'll call you. You don't need to post it on optiboard, you can just send it to eaglevision and I'll call you. I just have a couple of questions about the equipment and would like to talk to you about shipping options. Also, I would really like to see the pictures of the equipment if you could email them to me.

eaglevisioncenter@yahoo.com

Thanks

[visionone]

pm sent

[hipoptical]

Thanks to everyone who has responed so far. The finish equipment is gone, but I still need the surfacing sold. MAKE ME AN OFFER... get it this week and it's yours for... $3500?? Buy it from me and resell it without ever turning it on, and you could make some money. Use it in your office and compete with the chains AND save money. (I'll offer phone help for free). The equipment is worth it, I just don't have the time to wait.

[jagosnell]

Do you still have the finishing equipment available?

[jagosnell]

I meant the surfacing equipment, obviously the finishing is sold.

Thanks

[hipoptical]

Surfacing is still available as of today... so far. Make me an offer, I really need it gone this week.

[hipoptical]

Buy it today, and it's yours for $3,000 if you can get it by Saturday! If no takers, then I'm parting it out from a wharehouse. I'm telling the truth- the generator alone got a $2,500 upgrade about 9 months ago, there's about 8 lbs. of good, clean alloy, the blocker is like new, and the marker and tape are excellent condition. The cylinder machines work, but to be perfect will need about $200-300 in parts. That's the only downer. Check around- to piece this kind of equipment together (in this condition), you'll pay $7,500. Buy it from a "rebuilder" and you'll pay $10,500. Surely someone out there wants a deal....?
In case you're wondering if you can get it for less after Saturday- the answer is "NO". The price is low because I don't want to move it. After this weekend, I'll part it out and get the $6,000 I was wanting in the first place. Once it's in the wharehouse, I'm in no hurry...

[OptiJim]

Have you contacted the guys at Optical Works to see if they would be interested in buying?

[hipoptical]

Yes, thank you for the tip. I sent them info, and expect to hear from them today.

[swlobo]

is surface equipment still on market ?
call charles 512-353-3310
or send me your phone number eyesoftexas@austin.rr.com