I am search of a tool for engraving safety etchings into safety lenses. I do not know the name of this or a source for one of these tools. Any help would be greatly appreciated.
I am search of a tool for engraving safety etchings into safety lenses. I do not know the name of this or a source for one of these tools. Any help would be greatly appreciated.
UFRICH:cheers:
I don't know the name of the tool or where to find it. But I don't believe that you can just etch a mark onto a lens and have them qualify as safety glasses. You need to be an approved lab and have a registered logo. I believe with OSHA.
I was under the understanding that if you did the proper safety testing in your lab and could provide proof of this testing it qualified, but I my be wrong. I need to further research this. Thanks for the comment.
UFRICH:cheers:
UFRICH, You might want to understand the "risk" of this vs. the profitablility...some things just aren't worth the grief?
That is definately something we are weighing. It is for a small company in the area. Right now we are gathering all of the cost involved in doing this project befroe we make any proposals.
UFRICH:cheers:
I believe Vigor/Grobet optical has what you are looking for. go to http://qtena.com/optical/Originally Posted by UFRich
and look under staking tools.
Rich:
We are using what was originally an air operated spark plug cleaner, we simply glued a rubber disk with our initials over the hole the spark plug originally went in. I'm not sure where we got the rubber disks made and I believe they had to be registered with OSHA. I'll try to get more info to you as sson as possible.
Mike
Mike
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks