The simplest answer is you want the first lens with less step so there is no visible ring around the inside eyewire. Take picture 1 send with an email and ask for no gap on a remake, done.
A labs...
Type: Posts; User: Plausible; Keyword(s):
The simplest answer is you want the first lens with less step so there is no visible ring around the inside eyewire. Take picture 1 send with an email and ask for no gap on a remake, done.
A labs...
This!!!!
Epic Lab in Minnesota
Polished lenses or no polish? All materials or just one? V bevel only or Grooved lenses as well?
Wait?!?!?! Retired, lives in California and was in Optical? You Sir are my hero and must have made a mint$$$$$
Just kidding!!!! Thanks for the tip, I will check out the tank bond!!!!!
The closer you can match lens shape to frame shape coupled with the lens bevel curvature to the frame front curve the better the fit will be both in lens retention while achieving the least amount of...
I wonder if a chemistry clip comes in a light green polar? If it does put that over the top of the Trans Xtra Active lenses.
May I ask, are these lenses ordered with anti reflective coating as well?
No tool needed, index finger on the top nasal of the eyewire just above the bridge and your thumb on the bottom nasal of the eyewire. Apply pressure from the thumb and squeeze the eyewire together....
Ansi defines the tolerance + or - 3 degrees. Take the new lenses out of the frame and do your stress test, I bet there is still have a cross effect (maybe not as bold but still there). Virtually all...
Part 2 of Reason #1 "no skill need it" You should order your glasses cut and edged from a lab with skilled edger operators.
Everyone above is spot on. A hide a bevel leaves the edge thickness of a lens behind the bevel straight out at a 90 degreen angle and that excess thickness is most of the issue. That wall of lens...
Chris!!!! You just contributed to the demise of yet another independent pet shop owner with your on line purchase!!!!!! If you think independent opticians are on the verge of extinction just try to...
Unless he must have a full metal. There is always the option of selecting a 3 piece drill mount and putting the favored shape and size into it.
Advertise for a trunk show the day following the two week advertiser period or a new patient % off an exam and glasses when they mention the ad during the time the ad runs. Either would give you a...
Are you saying this edger comes standard with a built in camera?
We have a mei edger here at our lab, one really nice feature of it is being able to "tweak" a shape by adding or removing or moving an individual tracer points or group of points within the shape....
Wrapped frames and glass lenses only really go together with thin plano lenses. Rx lenses - in glass - in wrap frames do not work well or actually at all due to the small lens diameter offered in...
Absolutely ridiculous, keep hurling stones. We have not gone anywhere!!! Wait and see, we will prove you wrong.
Disagree, no way it would have the opposite effect. While it certainly will raise the cost of goods for retailers buying from oversea's it will help level the playing field for the Optical Lab's...
Agree with this, also when peeling from the roll to place on the block be sure to only touch the tab portion to do this. Then place the block into the blocker chuck BEFORE peeling the pad cover for...
Isn't there a rule against bumping your own thread? Last 9 posts have been by the thread starter and I think we all get the jist....................
Agree'd you really can't be too careful nowadays and with posters from countries all over the world; a chemical such as the one joked about could possibly be acquired and tried without knowing it's a...
"Gig' em Aggies" engraving example from a poster in Saudi Arabia? I knew the Aggies were popular but "Hook 'em Horns!!!!"
Contact your lab rep or lab that you work with and get your lenses / work from, they may have the resources you need or an education department set up with training sessions available. I love the...