Figured it out - let it sit for Saturday and Sunday and just pushed it in harder on Monday. We don't carry these but I have a hard time saying no to challenges.
Type: Posts; User: snowmonster; Keyword(s):
Figured it out - let it sit for Saturday and Sunday and just pushed it in harder on Monday. We don't carry these but I have a hard time saying no to challenges.
It's a different type of system, not like Silhouette.
We don't do many Airlock/Kawasaki frames here but we currently have one in the lab. What's the easiest way to get the frame back into the bushing? We've got one temple that just needs to be pushed in...
I have to disagree. I always dot the lens and have the ICE 1000 find the dots and leave the lens centered for a typical PAL. If you use manual mode with a bit of decentration due to frame PD being...
It's Friday and I'm not thinking straight.
I'm blocking a polarized PAL on an ICE 1000 blocker. The Rx in the horizontal meridian is -4.50 OU and the horizontal prism is 3.00 BO OU. The frame PD...
I've got a patient that's a -3.25 OU wanting Rx inserts for his Valve Index VR headset. I'm guessing this is just a standard lens with AR edged into the semi-round inserts that he has. Does anyone...
I know - old thread. Does any significant moisture (water, I guess) come out of this edger hose connection that was run up the wall? I would like to run this hose under my edger into my cabinets to...
I've had a Santinelli ME1200 for years and was told originally it could edge Flak/Half Jacket style frames but I've got the wrong blocker for scanning the lens.
Do any of you have an OMA compliant...
Thanks for the help.
I know everyone here hates polycarbonate for drill mounts but we treat every hole and very rarely have stress crack issues. I would know since I’m the one that has to tear...
So this stuff at Optisource?
Not really for the same purpose but maybe this works?
http://www.1-800-optisource.com/Poly-Edge-Glaze-8oz.aspx
It should be a lot less expensive at least on a per ounce basis.
+1 on this for wanting a good replacement for Drill Seal without the words Trivex or Trilogy being mentioned. The stuff is fantastic.
I know this is an old topic but does the above-referenced cabinet really store 1,750 pair of stock lenses? Between finished single vision polycarb hard coat and finished single vision polycarb AR, I...
Hey all:
My Santinelli ME1200 edger has been running great until just recently. I had an I/O board error a while back and then everything seemed okay but now the machine won’t make any of its...
Thank you - it's been a while and I learned a lot quickly here. Add in practice growth, teenage kids with activities and I'm just to busy now for a lot of stuff. Pretty good if I can go this long...
Reviving a really old thread.
How do you block a round seg with prism, especially if the lens has no cylinder to simply go by axis and decentration while blocking? I know how to normally block a...
I realize that I can tint that with a combination of grays and browns but I was just hoping to switch to a less orange brown tint color anyway. I was looking at BPI and about 5 different colors seem...
Looking for a tint that resembles the sort of grayish brown Ray Ban tint, not the G15 gray/green color. The tint we have seems to be more of an orange brown color.
Here's what I'm looking for:
...
Haven't been around much lately but I'm looking for a Ray Ban 6213 drill chart for the 53 eye size. Can anyone help?
Thanks in advance!
Water. Coldness isn't generally an issue until more crap gets built up inside chiller/pump/tubing and then I have to blow it out with compressed air.
I've got a Elkay chiller in the lab that was set up by the group we bought it from. It's a recirculating (closed loop) system where a continuous pump sits inside of a small cooler with water in it. ...
I have a Less Stress but I now have an ME1200 that almost everything gets done on automatically.
Hello! It's been a while...
I've got a patient that needs new lenses in his Kazuo Kawasaki frame - MP631 in a 48 eye size.
Anyone know the hole sizes and locations? I think I remember hearing...
This is perfect - thanks! One more question - is it drilled straight back or perpendicular to the lens surface?
I'm needing the hole/notch sizes and spacing for a Marchon Airlock frame - it's an AL800/53 in a 49 eye size.
I called Marchon and all they did was send a pattern but nothing with any...