The message barcode 39 only means that the barcode reader is initialized and working. Most operators never notice it is always on until they have a problem. The error code A75 c22.4/601 is Error...
Type: Posts; User: Thumbs; Keyword(s):
The message barcode 39 only means that the barcode reader is initialized and working. Most operators never notice it is always on until they have a problem. The error code A75 c22.4/601 is Error...
I would look at the Delta 200 system from Essilor Instruments. https://www.essilorinstrumentsusa.com/products/lens-finishing-systems/delta-100-200-300/
No you can not. The Delta 200 can be connected to the Tess tracer and is being sold with it.
To confirm, all of Essilor branded edging systems have always and currently are manufactured in France where their current location is about 2 hours outside of Paris in a small town called Ligney....
That is unfortunate that your part time tech has experienced what you state. I found the Mr Orange to be a lot faster than the ME -1200 by up to 50% when it was programmed correctly. The drilling...
Not that I question Coburn's tech about a blown port driver but if you know of someone near you with a N95 kappa you should test your board on there machine. If you want to send to me I can test it...
If the lens is off axis but the block did not slip check the wiring harness connection at the lens drive motor. If the harness is being held to the motor with a Velcro strap and a wire tie around it,...
Have you looked at Essilor Instruments Mr Blue or Mr Orange? Features include milling, drilling, step bevel, remote maintenance, software updates for life, chemistries software at no charge, job...
You could also try calling Essilor Instruments USA at 1-855-393-4647 for support. The Triumph edger/tracer where manufactured by Essilor for GerberCoburn back in the 90's. Currently National...
I know the owner personally, an independent Massachusetts licensed optician who knows what the customers are looking for. He goes to the extreme to keep his customers satisfied and very easy to do...
10 years old and no service from the only distributor in the US? Does Santinelli disclose this at the time of sale? Never trusted their sales pitches and this confirms I made the right decision years...
GerberCoburn was sold over a year ago and their new name is Coburn Technologies. At that time, they lost the distribution for Essilor edgers and Essilor started to distribute directly under the name...
You should check out the Essilor Mr Blue and Mr Orange? They both can drill, chamfer, shelf bevel for high base and groove. Mr Blue has a milling bit to eliminate slippage/crazing of AR lenses while...
[QUOTE=bhess25;401905]i spoke with the rep @ east west...mr.blue is 61k...unless you get the mye touch feature then its cloer to 69k!![/QUOTE
The price that you are quoting is not close to what...
The Essilor Rainyl groover is what I was thinking of as the only manual groover available today.
http://www.ophthalworld.de/cosmoshop/pix/a/n/1313579791-15128.jpg
You can purchase a new one from Essilor Instruments @ 1-855-ez-finish
So, I stand by my statement, calling Santinelli, "huge" and Coburn "small" is all relative and making assumptions on the level of service that they may, or may not, be able to provide based on size...
"I have no idea where you get this information from but wherever it is you may seriously want to find another source. Or take the time to do a little research."
Here are some facts about...
Possible communication cable/connection issue? Try using another communication port and/or cable. SGX will read job not found if there is no communication to the Innovations program.
You cannot retrieve the trace data from the 7070 for exporting.
the drill on the smartdrill that I do use anymore says the manufacturer is Proxxon and I believe the model is Micromot IB/E
This machine is worth whatever you would be willing to pay for it yourself. Remembering that you would be purchasing it with no training, installation, warranty, the trust from the seller, etc..
To update the total confusion of Gamma vs Kappa from Essilor, as of Essilor taking over the distribution of edgers in the US from GerberCoburn, they have also changed the names around.
They are as...
Thanks for the info. What does a rebuilt and new Gamma tracing table cost these days?
I agree that WECO edgers are workhorses and worth the price. Unfortunately, here in the states, WECO is all but non-existent. They can't keep a distributor for more than a year or two, currently AIT...