Search:

Several years ago we began offering a comparable pad to Big Red. It has the anti-slip layer on top of the bi-adhesive pad. However, as lens materials and coatings evolved, our customers reported...

Here at Santinelli, we are always looking for pads that consistent and hold super-hydrophobic coated lenses. We have tested many of the ‘specially formulated’ adhesives pads and discovered nothing...

Hi C, Just a note of correction both machines can change the shape of the lens. The 700's process may actually be a bit easier to use. Best, Stephen

I was trying to point out that, in conversations about slippage with our customers, seldom are wheels suspect as a variable contributing to this issue. Contrary to cutting blades that are replaced...

John, Thanks for a great update to a much welcomed education on all the causes and preventions of lens slippage. Another little devil that has entered into this picture is the, harder than plastic,...

LMU calibration should not change the size of the lens?? If your lenses are small you must first confirm the tracer is calibrated. Once the tracer is calibrated then you should adjust your size. I'm...

It sounds like the feeler arm height is not correct. Here is an article on how to adjust it: How do I adjust the feeler arm height?

Best_Steve

We have been advising our customers to change the lens clamps more frequently as they tend to harden after 10 months. We are only advising increasing the chuck pressure to 160 (even 165) only if...

This Saturday, March 28 at BB King Blues Club, we will be opening the doors again for the optical industry’s second EyeRock New York benefit rock concert, and you are invited.

EyeRock:A charity...

Ah, you need the #S0000114 Full Eye Block ($3.50). The 1/2 version is no longer available and has been subsituted with a Graphite 1/2 Block #F0308502200 ($3.50). If you would like to order please...

Hi Jana,

Can you be more specific as to what you are requesting. Are you interested in the blocks or the lens adhesive pads?

Thanks,
Stephen Santinelli

Hi TheMAZwoman,

We are still servicing the LE-7070 edgers and are located in Suffolk county as well. However as this model is no longer in production, we do charge for phone support. If you are...

Santinelli International, the leader in lens finishing equipment, is selling its remaining stock of two original OEM Replacement Tracers for the Nidek LE-8000 lens edger at a drastically reduced...

Offered by Santinelli International, the leader in lens finishing, these original OEM parts for our LE-8000 lens edger are available at drastically reduced prices. All parts in new condition, unless...

Santinelli Int'l Inc. is selling out is remaining stock of new, original, OEM replacement parts for the Nedek LE-8000 lens edger at drastically reduced prices. All parts are in new condition and...

Santinelli Int'l Inc. is selling out its remaining stock of new, original, OEM replacement parts for the Nidek LE-8080 lens edger at drastically reduced prices. This lot includes the following:...

snowmonster, We have been very busy here with 2 completely new edger technology platforms. One was released last year at VEW (LEX Series) and the latest (LE Series) is going to be shown for the first...

Gary, Unfortunately the LE-7070 does not have that function and was produced pre-VCA communication specification, otherwise I would have recommended the same Fashionlab software cited above. In...

Unlike our latest LEX series, the LE-9000 was designed with with built in memory that is not upgradeable. I'm sorry that answering these technical questions are causing the threads to be moved into...

Yes, snowmonster! We have a software product that runs on a PC connected to the edger, called Fashionlab. It will store an unlimited quantity of jobs/shapes and, will also network remote offices as...

First of all, let me apologize for not responding sooner as it would have surely prevented some of the confusion and misinformation that has been posted on this thread. Apparently there has been some...

Good Question snowmonster, The Extra Size Mode (usually set ON) will change the A & B sizes proportionally (1 : 1) when the operator increases or decreases the SIZ value. With it off, the A : B...

braheem24, please send me a PM with your email address and I will be glad to send you the operators manual for no charge.

Stephen

Tickets for the First Eye Rock Benefit Concert... Now On Sale!

Who:
Over 20 of the industry’s best amateur rock musicians and singers will Rock Out on stage with the OffAxis Band. Plus special...

OffAxis
The Optical Manufacturers Classic Rock Band, OffAxis, is currently looking for a bass player who is willing to practice and gig at the three major trade shows; Vision Expo East, West and...