For feedback, comments and questions regarding the OptiBoard Discussion Forums.
Can anyone help? Something is affecting the OC position on my flat tops right lenses. On the left side lenses the OC is perfectly allign to the center of the bifocal, but all the right lenses came out with the OC in the center of the lens and not allign to the center of the bifocal. Im working...
Is there an add-on or can one be developed that would send a pm a member if their message is quoted in a reply?
Independent Optical Shop looking for a new user friendly management software to run in my business. Was using the original E-Z frame program. Do not like E-Z frame platinum. Thanks for any help, Mark
Hi can anyone help! we have recently bought a used surfacing lab but all the port cables for the step one blocker,sgx generator and computer arrived separately un-marked with a separate serial hub! i have tried a few combinations but not sure which is the right way but neither machine will find the...
Is there a means to leave a comment in the comment thread of one's own blog posts? It doesn't appear that is possible now - unless I'm missing something obvious here. Anyone??:confused::confused::confused: Bri~
Now, I access the OB on my mobile. The ease and convinance is remarkable. Just one difficulty I am facing is that I have to scroll up down and right left guessing the location of the 'Submit New Thread' button. If such buttons be made like 'Stickies' then, it would be encouraging. Thanks.
This is what I see when I click on settings... Anyone have any idea how I can remove the subscribed group from my settings page? I've even renounced my membership in the manly club and it's still there :hammer: http://img229.imageshack.us/img229/9195/groupl.jpg
Okay, someone help me here please. Why is it that when I click the reputation icon I can't leave a message? Also, is there some way to be notified when you recieve reputation, like when you get a pm?
Can't figure out how to make it go away. My "Notifications" at the top of the page is showing "1", and it says I have an unread message, but I do not as far as I can tell. Any help?
Anybody else notice that some words are doubled in posts? I've had several and see them a lot. The one I posted I know I didn't write the same word back to back. Is there a small glitch in the system?
http://www.optiboard.com/forums/content.php?styleid=45 If you click on the link (above) I think you will see what I'm talking about. Over on the right side I expect to see excerpts under the heading "Recent Forum Posts". I don't see anything over there on the right side of the page. It's...
I even spent half an hour trying to look for an orange VB4 skin and found out steve was IT for VB with 143K posts :hammer: Needless to say, I think you know what you're doing so I'll stick to begging only.
Hello Steve. The only thing that I have to say about the new format (so far) is that hypertext links are not visible to me until I roll my mouse over the blank space where the link text used to be. For example: This is a link Perhaps you're working on this even as I post? Other than...
I am an ECP and I seem to have acquired more eyeyglasses, sunglasses, and Plano sun's than I have the room for or can keep track of. Does anyone have for sale or know where I can get ahold of a modest sized, preferably acrylic display case/box for all my eyeglasses? I'm in the process of updating...
I purchased a frame warmer model CF-320. After just a few uses it no longer heats up. Has anyone experienced this problem? I wondered if perhaps it might have a blown fuse, but I don't see any place on the unit where a fuse might be. The operating manual that came with the unit doesn't show one...
I think you might want to specify a width rather than having it expand to fill the screen. As the owner of a big monitor, it's a huge chore to read such wide text. Due to the increase in widescreen-monitor use, it's really almost necessary to specify a width.
Since I subscribe Optiboard I have been visiting the forum, from time to time, picking useful tips, happy to have the chance to have a wider point of view ( I live and work in Italy). My only little complaint regards the large use of acronyms ( RD, SV, FT and so on). Where can I look for their...
Is there a quicker way to mark all posts as "Read?" I like to be able to click "New Posts" at the top of the page, but as there are some threads I might never read, I don't want to click on all of them to clear them. It's also time-consuming to open each forum, and mark it as "read" (although, it...
Dear OB, for the last one week very funny things are happening, i am unable to post reply(not in all threads). today i started a thread but landed with some error. got a message to reactive password and username, when i was alsready loggedin. just let me know whether i need to chuck my PC out...
I'm looking for a paloriscope for an apprentice program,it is required we have one in the office,to be approved in NC. If you have one for sale please let me know. Thanks Linda:hammer:
There are currently 1 users browsing this forum. (0 members & 1 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules