Fezz
09-05-2006, 10:52 PM
I took Chris Ryser up on an invitation to try and review his companies product; DIAMOND SLICK COAT.
I have no financial interest in his company and have not /will not receive any finacial compensation for the following review.
I apologize if this does not replicate the Optiboard Product review Submission Form exactly. My computer skills and use of an Apple/Mac based format have been a bit of a stumbling block.
Reviewer Name: Bob Fesmire
OptiBoard User Name: Fezz
Date of Review: August 31, 2006
Occupation: Optician
Employer:
Location: Pennsylvania
Product Category: other....Optical Chemicals
Product Name: DIAMOND SLICK COAT
Product Vendor and/or Distributor: OMS
Vendor website: http:://Optochemicals.com (1-800-461-6637)
5 stars = Excellent
4 stars = Good
3 stars = Acceptable
2 stars = Not good
1 star = Poor
0 stars = Not recommended
Quality: ****(4)
Ease of use: *****(5)
Client acceptance (if applicable):
Customer service of the manufacturer or distributor: *****(5)
Value: ****(4)
Overall:*****(5)
Review:
DIAMOND SLICK COAT is a in-house dip coating to give Anti-Reflective lenses a Anti-fog, Anti-Static, and easy to clean, top coat that the professional can use to duplicate the properties of the premium AR coatings that are on the market today, without paying the premium prices these products demand. You can also apply this to non-AR lenses to give the same properties.
I found the product very easy to use. 1.) Dip the lens into the solution for not more than a second 2.) Dry the lens from the center outwards while rotating the lens to avoid smears and smudges. 3) Thats it!
DIAMOND SLICK COAT definitely makes the lens easier to clean. Then lens also seems to become much less prone to static, or attracting lint and debris from cleaning.
I have two concerns with this product.
1.) I am not sure how long or durable this coating is. I am unsure if it will last the life of the lens. I have not been using it long enough to determine its lasting effects.
2.) The DIAMOND SLICK COAT has a short shelf life. My bottle was manufactured 06/28/2006 and a UNOPENED shelf life of four months. The directions state that you should pour the entire contents into an airtight plastic container and leave as little airspace as possible. I feel that much of this will go to waste unless your practice has the volume of AR to justify the cost. You can also apply this to uncoated non-AR lenses to give them the same properties.
Overall, I feel DIAMOND SLICK COAT is a very easy to use and potentially profitable alternative to the premium AR with topcoats that are on the market. I would also like to thank Chris Ryser who runs OMS, for providing me with the sample of this and a few other OMS products to review. He was very generous and talked me through the ordering of and use of his product.
Would you purchase this product or other products from this company based on your experience with this product?
I would purchase this product IF the long term durability proves to be on par with the available premium AR topcoats.
I have no financial interest in his company and have not /will not receive any finacial compensation for the following review.
I apologize if this does not replicate the Optiboard Product review Submission Form exactly. My computer skills and use of an Apple/Mac based format have been a bit of a stumbling block.
Reviewer Name: Bob Fesmire
OptiBoard User Name: Fezz
Date of Review: August 31, 2006
Occupation: Optician
Employer:
Location: Pennsylvania
Product Category: other....Optical Chemicals
Product Name: DIAMOND SLICK COAT
Product Vendor and/or Distributor: OMS
Vendor website: http:://Optochemicals.com (1-800-461-6637)
5 stars = Excellent
4 stars = Good
3 stars = Acceptable
2 stars = Not good
1 star = Poor
0 stars = Not recommended
Quality: ****(4)
Ease of use: *****(5)
Client acceptance (if applicable):
Customer service of the manufacturer or distributor: *****(5)
Value: ****(4)
Overall:*****(5)
Review:
DIAMOND SLICK COAT is a in-house dip coating to give Anti-Reflective lenses a Anti-fog, Anti-Static, and easy to clean, top coat that the professional can use to duplicate the properties of the premium AR coatings that are on the market today, without paying the premium prices these products demand. You can also apply this to non-AR lenses to give the same properties.
I found the product very easy to use. 1.) Dip the lens into the solution for not more than a second 2.) Dry the lens from the center outwards while rotating the lens to avoid smears and smudges. 3) Thats it!
DIAMOND SLICK COAT definitely makes the lens easier to clean. Then lens also seems to become much less prone to static, or attracting lint and debris from cleaning.
I have two concerns with this product.
1.) I am not sure how long or durable this coating is. I am unsure if it will last the life of the lens. I have not been using it long enough to determine its lasting effects.
2.) The DIAMOND SLICK COAT has a short shelf life. My bottle was manufactured 06/28/2006 and a UNOPENED shelf life of four months. The directions state that you should pour the entire contents into an airtight plastic container and leave as little airspace as possible. I feel that much of this will go to waste unless your practice has the volume of AR to justify the cost. You can also apply this to uncoated non-AR lenses to give them the same properties.
Overall, I feel DIAMOND SLICK COAT is a very easy to use and potentially profitable alternative to the premium AR with topcoats that are on the market. I would also like to thank Chris Ryser who runs OMS, for providing me with the sample of this and a few other OMS products to review. He was very generous and talked me through the ordering of and use of his product.
Would you purchase this product or other products from this company based on your experience with this product?
I would purchase this product IF the long term durability proves to be on par with the available premium AR topcoats.